Houston, TX Office Equipment - Apollo Office Systems
Categories
Menu
Lenovo 95Y2375 network card Internal Fiber 8000 Mbit/s1

Lenovo 95Y2375 network card Internal Fiber 8000 Mbit/s

Lenovo 95Y2375. Internal. Connectivity technology: Wired, Interface: Fiber. Maximum data transfer rate: 8000 Mbit/s
Manufacturer: Lenovo
SKU: 4039752
Manufacturer part number: 95Y2375
GTIN: 0883436226592
The network architecture on the Flex System platform has been specifically designed to address network challenges, giving you a scalable way to integrate, optimize, and automate your data center. The Flex System™ FC3052 2-port 8Gb Fibre Channel Adapter enables high-speed access for Flex System compute nodes to an external storage area network (SAN). This adapter is based on the proven Emulex Fibre Channel stack, and works with any of the 8 Gb or 16 Gb Flex System Fibre Channel switch and pass-thru modules.
  • Based on the Emulex "Saturn" 8Gb Fibre Channel I/O Controller (IOC) chip
  • Multifunction PCIe 2.0 device with two independent FC ports
  • Auto-negotiation between 2-Gbps, 4-Gbps, or 8-Gbps FC link attachments
  • Complies with the PCIe base and CEM 2.0 specifications
  • Enablement of high-speed and dual-port connection to a Fibre Channel SAN
  • Comprehensive virtualization capabilities with support for N_Port ID Virtualization (NPIV) and Virtual Fabric
  • Simplified installation and configuration using common HBA drivers
  • Common driver model that eases management and enables upgrades independent of HBA firmware
  • Fibre Channel specifications:
  • Bandwidth: Burst transfer rate of up to 1600 MBps full-duplex per port
  • Support for point-to-point fabric connection: F-Port Fabric Login
  • Support for Fibre Channel Arbitrated Loop (FC-AL) and FCAL-2 FL-Port Login
  • Support for Fibre Channel services class 2 and 3
  • Single-chip design with two independent 8 Gbps serial Fibre Channel ports, each of which provides:
  • Reduced instruction set computer (RISC) processor
  • Integrated serializer/deserializer
The network architecture on the Flex System platform has been specifically designed to address network challenges, giving you a scalable way to integrate, optimize, and automate your data center. The Flex System™ FC3052 2-port 8Gb Fibre Channel Adapter enables high-speed access for Flex System compute nodes to an external storage area network (SAN). This adapter is based on the proven Emulex Fibre Channel stack, and works with any of the 8 Gb or 16 Gb Flex System Fibre Channel switch and pass-thru modules.
  • Based on the Emulex "Saturn" 8Gb Fibre Channel I/O Controller (IOC) chip
  • Multifunction PCIe 2.0 device with two independent FC ports
  • Auto-negotiation between 2-Gbps, 4-Gbps, or 8-Gbps FC link attachments
  • Complies with the PCIe base and CEM 2.0 specifications
  • Enablement of high-speed and dual-port connection to a Fibre Channel SAN
  • Comprehensive virtualization capabilities with support for N_Port ID Virtualization (NPIV) and Virtual Fabric
  • Simplified installation and configuration using common HBA drivers
  • Common driver model that eases management and enables upgrades independent of HBA firmware
  • Fibre Channel specifications:
  • Bandwidth: Burst transfer rate of up to 1600 MBps full-duplex per port
  • Support for point-to-point fabric connection: F-Port Fabric Login
  • Support for Fibre Channel Arbitrated Loop (FC-AL) and FCAL-2 FL-Port Login
  • Support for Fibre Channel services class 2 and 3
  • Single-chip design with two independent 8 Gbps serial Fibre Channel ports, each of which provides:
  • Reduced instruction set computer (RISC) processor
  • Integrated serializer/deserializer
Products specifications
Attribute nameAttribute value
CertificationUnited States FCC 47 CFR Part 15, Subpart B, ANSI C63.4 (2003), Class A United States UL 60950-1, Second Edition IEC/EN 60950-1, Second Edition FCC - Verified to comply with Part 15 of the FCC Rules, Class A Canada ICES-003, issue 4, Class A UL/IEC 60950-1 CSA C22.2 No. 60950-1-03 Japan VCCI, Class A Australia/New Zealand AS/NZS CISPR 22:2006, Class A IEC 60950-1(CB Certificate and CB Test Report) Taiwan BSMI CNS13438, Class A Korea KN22, Class A; KN24 Russia/GOST ME01, IEC-60950-1, GOST R 51318.22-99, GOST R 51318.24-99, GOST R 51317.3.2-2006, GOST R 51317.3.3-99 IEC 60950-1 (CB Certificate and CB Test Report) CE Mark (EN55022 Class A, EN60950-1, EN55024, EN61000-3-2, EN61000-3-3) CISPR 22, Class A
Compatible operating systemsMicrosoft Windows Server 2008 R2 Microsoft Windows Server 2008, Datacenter x64 Edition Microsoft Windows Server 2008, Enterprise x64 Edition Microsoft Windows Server 2008, Standard x64 Edition Microsoft Windows Server 2008, Web x64 Edition Microsoft Windows Server 2012 Microsoft Windows Server 2012 R2 Red Hat Enterprise Linux 5 Server with Xen x64 Edition Red Hat Enterprise Linux 5 Server x64 Edition Red Hat Enterprise Linux 6 Server x64 Edition Red Hat Enterprise Linux 7 SUSE LINUX Enterprise Server 10 for AMD64/EM64T SUSE LINUX Enterprise Server 10 with Xen for AMD64/EM64T SUSE LINUX Enterprise Server 11 for AMD64/EM64T VMware ESXi 4.1 VMware vSphere 5.0 (ESXi) VMware vSphere 5.1 (ESXi) VMware vSphere 5.5 (ESXi)
Customer service
Information
    Copyright © 2024 Apollo Office Systems. All rights reserved.
    Powered by nopCommerce