Axiom SSD3558X1TB-AX internal solid state drive 1000 GB Serial ATA III 3D TLC

Axiom SSD3558X1TB-AX. SSD capacity: 1000 GB, Read speed: 550 MB/s, Write speed: 505 MB/s, Data transfer rate: 6 Gbit/s, Component for: PC
Manufacturer: Axiom
SKU: 5662588
Manufacturer part number: SSD3558X1TB-AX
MSRP: $335.00
$294.55
The Axiom C550n is a high-performance SATA 6Gb/s SSD ideally suited for cost-effective, small form factor and low power client and industrial storage solutions for PCs, Ultrabooks, Tablet PCs, and other embedded applications. Featuring the Silicon Motion SM2258 controller and quality 3D TLC NAND, these SSDs are loaded with enhancements to promote a high performing and reliable computing environment. TRIM, Wear Leveling, StaticDataRefresh, and LDPC ECC functions optimize data processing efficiency. S.M.A.R.T. and a built-in temperature sensor assist with monitoring drive health. The 3D TLC SSD provides outstanding transfer speeds. Improved system startup, data access, application loading, and backup times are typically realized when upgrading systems from a traditional spinning disk hard drive to a 3D TLC SSD. SLC Cache is included and further enhances read/write and IOPS ratings. The 3D TLC SSD is an ultra-low-power storage solution with DevSleep support, providing improved notebook battery life and lower cooling costs in datacenters. 3D TLC SSDs are compatible with any operating system and work in both SATA and SAS environments. Reduced Power Requirements • No moving parts • Super-low operating and standby power needs • Power requirements notably reduced over a typical HD Fast Performance • Virtually zero spin up or seek times • Zero rotational latency • High sustained data transfer rate Reliable • No volatile memory elements • Improved resistance to shock & vibration • Predictable and manageable failure modes reduce IT costs Improved Operation • Noise and vibration free • Virtually no heat emissions

 

  • Silicon Motion 3D TLC Flash controller
  • StaticDataRefresh technology ensures data integrity
  • SLC caching accelerates burst performance
  • Device Sleep mode (DEVSLP) supported for ultra low idle power consumption
  • SATA 3.0 (6Gb/s) interface (backwards compatible with SATA 2.0 (3Gb/s) and SATA 1.0 (1.5Gb/s))
  • Supports Security Erase
  • TRIM support (OS/driver support required)
  • High-reliability 3D TLC NAND flash
  • S.M.A.R.T. support
  • Temperature sensor
The Axiom C550n is a high-performance SATA 6Gb/s SSD ideally suited for cost-effective, small form factor and low power client and industrial storage solutions for PCs, Ultrabooks, Tablet PCs, and other embedded applications. Featuring the Silicon Motion SM2258 controller and quality 3D TLC NAND, these SSDs are loaded with enhancements to promote a high performing and reliable computing environment. TRIM, Wear Leveling, StaticDataRefresh, and LDPC ECC functions optimize data processing efficiency. S.M.A.R.T. and a built-in temperature sensor assist with monitoring drive health. The 3D TLC SSD provides outstanding transfer speeds. Improved system startup, data access, application loading, and backup times are typically realized when upgrading systems from a traditional spinning disk hard drive to a 3D TLC SSD. SLC Cache is included and further enhances read/write and IOPS ratings. The 3D TLC SSD is an ultra-low-power storage solution with DevSleep support, providing improved notebook battery life and lower cooling costs in datacenters. 3D TLC SSDs are compatible with any operating system and work in both SATA and SAS environments. Reduced Power Requirements • No moving parts • Super-low operating and standby power needs • Power requirements notably reduced over a typical HD Fast Performance • Virtually zero spin up or seek times • Zero rotational latency • High sustained data transfer rate Reliable • No volatile memory elements • Improved resistance to shock & vibration • Predictable and manageable failure modes reduce IT costs Improved Operation • Noise and vibration free • Virtually no heat emissions

 

  • Silicon Motion 3D TLC Flash controller
  • StaticDataRefresh technology ensures data integrity
  • SLC caching accelerates burst performance
  • Device Sleep mode (DEVSLP) supported for ultra low idle power consumption
  • SATA 3.0 (6Gb/s) interface (backwards compatible with SATA 2.0 (3Gb/s) and SATA 1.0 (1.5Gb/s))
  • Supports Security Erase
  • TRIM support (OS/driver support required)
  • High-reliability 3D TLC NAND flash
  • S.M.A.R.T. support
  • Temperature sensor

Products specifications

Attribute name Attribute value
Controller type SMI SM2258
DevSlp (device sleep) support Y
Technical details
Sustainability certificates RoHS
Ports & interfaces
Interface Serial ATA III
Design
Certification TAA
Operational conditions
Operating temperature (T-T) 0 - 70 °C
Storage temperature (T-T) -40 - 85 °C
Operating relative humidity (H-H) 5 - 95 %
Operating shock 1500 G
Operating vibration 3.1 G
Power
Power consumption (idle) 0.09 W
Power consumption (max) 2.1 W
Features
Write speed 505 MB/s
Random read (4KB) 73000 IOPS
Component for PC
ECC Y
Data transfer rate 6 Gbit/s
Mean time between failures (MTBF) 1500000 h
SSD capacity 1000 GB
Memory type 3D TLC
Read speed 550 MB/s
S.M.A.R.T. support Y
Random write (4KB) 80000 IOPS
TRIM support Y

Product tags

  • (51241)
/* Added for Digitol */ /* End Added for Digitol */