APC SurgeArrest Panelmount 208/120V 160KA Gray 208 V

APC SurgeArrest Panelmount 208/120V 160KA. Nominal input voltage: 208 V, AC input frequency: 50 - 60 Hz, Peak current, normal mode: 160000 A. Product color: Gray, EMI/RFI noise filtering: 30 dB, Response time: 0.000001 ms. Weight: 37 lbs (16.8 kg), Width: 16.5" (418 mm), Depth: 5.98" (152 mm). Certification: UL 1283,UL 1449,cUL. Package width: 19.3" (490 mm), Package depth: 12" (305 mm), Package height: 25" (635 mm)

Manufacturer: APC

SKU: 2289524

Manufacturer part number: PMF4DS-A

GTIN: 0731304260080

SurgeArrest Panelmount 208/120V 160KA w/ Disconnect & Surge Counter

High quality TVSS for datacenters, industrial facilities and commercial buildings.

Alarm contacts
Enables remote monitoring of TVSS alarm status.

Replaceable individual phase modules
Significantly reduces the time to repair a damaged surge protector, minimizing the time that critical loads are unprotected from transients.

Protection Working Indicator
SurgeArrest will warn you if its circuitry has been damaged by heavy strike or power line surge and it is unable to provide 100% protection. If still under warranty, APC will then replace your damaged SurgeArrest free of charge.

Lightning and Surge Protection
To prevent damage to your equipment from power surges and spikes.

Noise Filtering
120kA SurgeArrest models contain EMI/RFI filtering to reduce line noise that can cause data loss and keyboard errors. 40kA and 80kA units do not contain noise filtering components, so they can be used with powerline networking systems (X10, HomePlug, PLC, etc.).

Maximum surge current ratings
40kA, 80kA and 120kA per phase maximum surge current ratings, for all your residential, commercial and individual equipment protection needs.

Catastrophic Event Protection
SurgeArrest Panelmount SPDs are equipped with fuses and thermal disconnects that react quickly to protect against dangerous high and low current wiring faults as well as other catastrophic surge events. These panelmount SPDs are passive, and continue to allow power through to your home or building if any of the surge components are damaged.

Status Indicator LED's
LED status indicators for each phase and an audible alarm provide immediate failure notification when suppression circuitry has been damaged by a heavy strike or surge.

Physical Size
For easy installation inside your circuit breaker panel (40kA model) or next to your power distribution panels. (80kA and 120 kA models)

Chase nipple connection
Allows for mounting of the PM2X units rigidly to the side of your panelboard.

Products specifications

Attribute name	Attribute value
Packaging net weight	41.1 lbs
EMI/RFI noise filtering	30 dB
Peak current, normal mode	160000 A
Peak current, common mode	80000 A
Width	16.5"
Depth	5.98"
Height	22"
Weight	37 lbs
Response Time	0.000001 ms
Technical details
Input connections	5-wire(3PH+N+G)
Product color	Gray
Packaging data
Package depth	12"
Package height	25"
Package width	19.3"
Ports & interfaces
Ethernet LAN (RJ-45) ports	0
Design
Certification	UL 1283,UL 1449,cUL
Operational conditions
Operating temperature (T-T)	-20 - 65 °C
Storage temperature (T-T)	-40 - 65 °C
Operating relative humidity (H-H)	0 - 95 %
Storage relative humidity (H-H)	0 - 95 %
Operating altitude	0 - 118110.2"
Non-operating altitude	0 - 118110.2"
Power
Nominal input voltage	208 V
AC input frequency	50 - 60 Hz
Features
LED indicators	Yes
Audible alarm(s)	Yes
Wall mountable	Yes

Product tags

(82310)