APC Smart-UPS uninterruptible power supply (UPS) Line-Interactive 4 AC outlet(s)1

APC Smart-UPS uninterruptible power supply (UPS) Line-Interactive 4 AC outlet(s)2

APC Smart-UPS uninterruptible power supply (UPS) Line-Interactive 4 AC outlet(s)3

APC Smart-UPS uninterruptible power supply (UPS) Line-Interactive 4 AC outlet(s)

APC Smart-UPS. UPS topology: Line-Interactive, Waveform: Sine, Input operation voltage (min): 151 V. AC outlet types: C13 coupler, Power plug: C14 coupler, AC outlets quantity: 4 AC outlet(s). Battery technology: Sealed Lead Acid (VRLA), Battery capacity: 336 VAh, Typical backup time at full load: 8.7 min. Form factor: Rackmount, Product color: Black, Rack capacity: 2U. Width: 18.9" (480 mm), Depth: 18.7" (475 mm), Height: 3.35" (85 mm)

Manufacturer: APC

SKU: 2993288

Manufacturer part number: SMT1000RMI2U

GTIN: 0731304284741

Intuitive LCD interface
Provides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.

Predictive replace battery date
Dynamically provides the month and year when battery replacement is recommended to aide in long term maintenance planning.

Audible alarms
Provide notification of changing flywheel conditions

InfraStruXure Central compatible
Enables centralized management via APC InfraStruXure® Central.

SmartSlot
Customize UPS capabilities with management cards.

Cold-start capable
Provides temporary battery power when the utility power is out.

Serial Connectivity
Use any Home Automation network to monitor and control the S20 through its RS-232 serial port. For information on how to communicate with the S20, see APC's Application Note #102. Crestron and AMX installers should visit their respective websites for information on how to integrate the S20 into those networks.

Resettable circuit breakers
Enables a quick recovery from overload events.

Hot-swappable batteries
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced

Disconnected battery notification
Warns when a battery is not available to provide backup power.

Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.

Automatic restart of loads after UPS shutdown
Automatically starts up the connected equipment upon the return of utility power.

Adjustable voltage-transfer points
Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.

Adjustable voltage sensitivity
Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.

Audible alarms
Provides notification of changing utility power and UPS conditions.

User-replaceable batteries
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)

USB connectivity
Provides management of the UPS via a USB port (not available on all models).

Serial Connectivity
Provides management of the UPS via a serial port.

Temperature-compensated battery charging
Prolongs battery life by regulating the charge voltage according to battery temperature.

Boost and Trim Automatic Voltage Regulation (AVR)
Gives higher application availability by correcting low and high voltage conditions without using the battery.

Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.

Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

Power conditioning
Protects connected loads from surges, spikes, lightning, and other power disturbances.

Network manageable
Provides remote management of the UPS over the network.

Adjustable voltage sensitivity
Provides the ability to adapt the Power Conditioner for optimal performance in specific power environments or generator applications.

Predicitive failure notification
Provides early-warning fault analysis ensuring proactive component replacement.

Products specifications

Attribute name	Attribute value
Width	18.9"
Depth	18.7"
Height	3.35"
Weight	62.2 lbs
Battery Capacity	336 VAh
Automatic Voltage Regulation (AVR)	Yes
Battery Recharge Time	3 h
Emergency Power Off (EPO)	O
Input Frequency	50/60 Hz
Quick installation guide	Yes
Battery life (max)	6 year(s)
Automatic battery test	Yes
UPS topology	Line-Interactive
Serial interface	Yes
Rack mount kit	Yes
Cold start	Yes
Number of output IEC jumpers	2
Hold time (max)	2 ms
Software CD	Yes
Auto-restart	Yes
SmartSlot	Yes
Compliance certificates	RoHS
Technical details
Product color	Black
Sustainability certificates	Green Premium
Serial interface type	RJ-45
Packaging data
Package width	23.4"
Package depth	23.7"
Package height	9.88"
Package weight	69.2 lbs
Ports & interfaces
AC outlets quantity	4 AC outlet(s)
AC outlet types	C13 coupler
Power plug	C14 coupler
USB port	Yes
Design
Certification	CSA, EAC, EN/IEC 62040-1, EN/IEC 62040-2, RCM, UL 1778, VDE, REACH, PEP, EOLI
Form factor	Rackmount
Operational conditions
Operating temperature (T-T)	0 - 40 °C
Storage temperature (T-T)	-15 - 45 °C
Operating relative humidity (H-H)	0 - 95 %
Storage relative humidity (H-H)	0 - 95 %
Operating altitude	0 - 118110.2"
Non-operating altitude	0 - 590551.2"
Power
Nominal input voltage	230 V
Features
Rack capacity	2U
LED indicators	Yes
Noise level	45 dB
Audible alarm(s)	Yes
Surge energy rating	459 J
Input operation voltage (min)	151 V
Input operation voltage (max)	302 V
Output operation voltage (min)	220 V
Output operation voltage (max)	240 V
Efficiency	98.2 %
Waveform	Sine
Other features
Nominal output voltage	230 V
Packaging content
Cables included	RS-232, USB cable
Logistics data
Quantity per pallet	8 pc(s)
Battery
Battery technology	Sealed Lead Acid (VRLA)
Typical backup time at full load	8.7 min
Typical backup time at half load	31.3 min
Hot-swap battery	Yes

Product tags

(82310)