Houston, TX Office Equipment - Apollo Office Systems

Transcend 512MB, DDR2, PC5300, 667MHz, soDIMM 200Pin, 64bit, 1.8V,CL5, 32Mx16, Notebook Memory memory module 0.5 GB

Transcend 512MB, DDR2, PC5300, 667MHz, soDIMM 200Pin, 64bit, 1.8V,CL5, 32Mx16, Notebook Memory. Internal memory: 0.5 GB, Internal memory type: DDR2, Memory clock speed: 667 MHz, Memory form factor: 200-pin SO-DIMM, CAS latency: 5
Manufacturer: Transcend
SKU: 1159532
Manufacturer part number: TS64MSQ64V6M
GTIN: 0760557798828
The TS64MSQ64V6M is a 32M x 64bits DDR2-667 SO-DIMM. The TS64MSQ64V6M consists of 8pcs 32Mx16its DDR2 SDRAMs in 84 ball FBGA packages and a 2048 bits serial EEPROM on a 200-pin printed circuit board. The TS64MSQ64V6M is a Dual In-Line Memory Module and is intended for mounting into 200-pin edge connector sockets. Synchronous design allows precise cycle control with the use of system clock. Data I/O transactions are possible on both edges of DQS. Range of operation frequencies, programmable latencies allow the same device to be useful for a variety of high bandwidth, high performance memory system applications.
Features -RoHS compliant products. -JEDEC standard 1.8V ± 0.1V Power supply -VDDQ=1.8V ± 0.1V -Max clock Freq: 333MHZ -Posted CAS -Programmable CAS Latency: 3,4,5 -Programmable Additive Latency :0, 1,2,3 and 4 -Write Latency (WL) = Read Latency (RL)-1 -Burst Length: 4,8(Interleave/nibble sequential) -Programmable sequential / Interleave Burst Mode -Bi-directional Differential Data-Strobe (Single-ended data-strobe is an optional feature) -Off-Chip Driver (OCD) Impedance Adjustment -MRS cycle with address key programs. -On Die Termination -Serial presence detect with EEPROM
The TS64MSQ64V6M is a 32M x 64bits DDR2-667 SO-DIMM. The TS64MSQ64V6M consists of 8pcs 32Mx16its DDR2 SDRAMs in 84 ball FBGA packages and a 2048 bits serial EEPROM on a 200-pin printed circuit board. The TS64MSQ64V6M is a Dual In-Line Memory Module and is intended for mounting into 200-pin edge connector sockets. Synchronous design allows precise cycle control with the use of system clock. Data I/O transactions are possible on both edges of DQS. Range of operation frequencies, programmable latencies allow the same device to be useful for a variety of high bandwidth, high performance memory system applications.
Features -RoHS compliant products. -JEDEC standard 1.8V ± 0.1V Power supply -VDDQ=1.8V ± 0.1V -Max clock Freq: 333MHZ -Posted CAS -Programmable CAS Latency: 3,4,5 -Programmable Additive Latency :0, 1,2,3 and 4 -Write Latency (WL) = Read Latency (RL)-1 -Burst Length: 4,8(Interleave/nibble sequential) -Programmable sequential / Interleave Burst Mode -Bi-directional Differential Data-Strobe (Single-ended data-strobe is an optional feature) -Off-Chip Driver (OCD) Impedance Adjustment -MRS cycle with address key programs. -On Die Termination -Serial presence detect with EEPROM