Tripp Lite U026-10M USB cable 393.7" (10 m) USB 2.0 USB A Gray

Tripp Lite's 10-meter ( 33 ft. ) USB 2.0 active extension cable is a bus powered extension cable that can be used to increase the length of a device cable without the worry of signal loss and potential performance problems. USB limits a cable's length to 16-ft. (4.88 m) Any length above 16-ft. (4.88 m) requires the use of an active cable such as this one. This cable has a signal booster built in. The overall cable length can be extended up to 131-ft. (39.92 m) by daisy chaining up to 4 of these active cables. The cable must be plugged directly into a USB port (either on the PC or a hub). Use a standard 6-ft. (1.83 m), 10-ft. (3.05 m), or 15-ft. (4.57 m) USB A-B cable to reach the desired distance. The U026-10M provides up to 150mA of power to the connected device. If your device requires more than 150mA of power, it will either need to have its own power supply; or, to be plugged into a powered USB 2.0 hub (such as U222-004-R) that is connected to the U026-10M. 10 meter ( 33 ft.) USB2.0 Active Extension Cable, USB-A Male to USB-A Female Full 480Mbps Transfer rate, as well as backward compatible to USB 1.1 ( 12Mbps ) Daisy Chain four cables for a total of 131-ft. (39.92 m) Bus Powered...no external power required Compatible with all major operating systems....Plug-and-Play; no software to load The U026-10M provides up to 150mA of power to the connected device. If your device requires more than 150mA of power, it will either need to have its own power supply; or, to be plugged into a powered USB 2.0 hub (such as U222-004-R) that is connected to the U026-10M.

• Extends and Boosts the signal to any USB device
• Supports data transfer speeds up to 480Mbps
• Built in Repeater maintains Hi-Speed USB signal quality, and electrical / timing specifications
• Plug and Play....Compatible with all major operating systems