Tripp Lite B140-202 video splitter DVI

Tripp Lite's B140-202, 2X2 DVI Matrix Switch allows two DVI Single-Link video sources to be routed to one or two RJ45 outputs and extended up to 45.72 m (150-ft.) @ 1920x1200 using Active (powered) Receiver, or up to 15.24 m (50-ft.) @ 1920x1200 using Passive (non-powered) Rec. Switching between sources is done manually or with included remote control. Additional monitors can be added beyond the typical two by using Tripp Lite B140-110 daisy-chain Receivers - up to 4 monitors per channel. - Share two DVI sources between two monitors - Supports DVI Single Link computer resolutions up to 1920 x 1200 @ 60Hz - Transmits over inexpensive Cat5e/6 cable up to 60.96 m (200-ft.) - Plug-and-Play - Share two DVI video sources between two monitors - Supports DVI Single Link computer resolutions up to 1920 x 1200 @ 60Hz - Allows either input to be routed to either output, or the one input signal to both outputs - Transmits over a single Cat5e/6 cable to a remote monitor up to 60.96 m (200-ft.) away - HDCP and EDID compliant - Plug-and-Play - A B140-Series remote receiver is needed at each monitor - Active (powered) and Passive (non-powered) Receivers available - Use 24AWG Solid Wire Cat5e/6 patch for maximum video performance - Further expand the range and number of monitors with B140-110 Daisy-Chain Repeaters - International AC Adapter B110-INT required for use with UK, European, and Australian power connections