Finisar FTCD3323R1PCL network transceiver module Fiber optic 400000 Mbit/s QSFP-DD

Finisar FTCD3323R1PCL. SFP transceiver type: Fiber optic, Maximum data transfer rate: 400000 Mbit/s, Interface type: QSFP-DD. Product color: Stainless steel. Input voltage: 3.3 V. Number of products included: 1 pc(s)
Manufacturer: Finisar
SKU: 7478926
Manufacturer part number: FTCD3323R1PCL
Coherent’s high transmit output power 400G QSFP-DD-DCO coherent transceiver will enable true IP-over-DWDM deployments in metro and regional optical transport networks. Reconfigurable optical add/drop multiplexers (ROADMs) in existing and emerging DWDM transport networks require a high optical launch power (0 dBm) and high transmit in-band and out-of-band optical signal-to-noise ratio (OSNR) on their add ports. The emerging OIF 400ZR and OpenZR+ MSA coherent transceivers in QSFP-DD and OSFP form factors generally have low transmit output power (-10 dBm), making them incompatible with ROADM networks. Consequently, to bridge the gap between the switch or router and the ROADM, networks still require transponder or muxponder equipment that uses coherent line interfaces either based on the larger CFP2 pluggable form factor, or on discrete component implementations on line cards. By plugging Coherent’s high transmit output power 400G QSFP-DD-DCO transceivers directly into their switches or routers, network operators can remove the intermediate transponder/muxponder equipment layer. This immediately reduces capital expenditures for network operators. But even more important, there are tremendous savings in operational expenditures: the IP-over-DWDM architecture enabled by the Coherent QSFP-DD-DCO shrinks the amount of space that needs to be rented in central offices or co-location sites, cuts down overall electrical power consumption, lowers cooling requirements, and simply reduces the number of network elements that need to be planned, installed, managed, and maintained.

 

  • Digital coherent optics module, QSFP-DD form factor, Type 2A
  • IEEE 400GE or n×100GE (n = 1…4) Ethernet-compliant host interface
  • Interoperable coherent 400G/300G/200G/100G optical interface
  • High Tx output power (0 dBm) and Tx OSNR for compatibility with deployed ROADM line systems
  • Transmission reach >600 km at 400G with extended reaches at lower data rates
  • Full C-band tunable with flexible grid support
  • Case temperature range 0°C to 70°C
Coherent’s high transmit output power 400G QSFP-DD-DCO coherent transceiver will enable true IP-over-DWDM deployments in metro and regional optical transport networks. Reconfigurable optical add/drop multiplexers (ROADMs) in existing and emerging DWDM transport networks require a high optical launch power (0 dBm) and high transmit in-band and out-of-band optical signal-to-noise ratio (OSNR) on their add ports. The emerging OIF 400ZR and OpenZR+ MSA coherent transceivers in QSFP-DD and OSFP form factors generally have low transmit output power (-10 dBm), making them incompatible with ROADM networks. Consequently, to bridge the gap between the switch or router and the ROADM, networks still require transponder or muxponder equipment that uses coherent line interfaces either based on the larger CFP2 pluggable form factor, or on discrete component implementations on line cards. By plugging Coherent’s high transmit output power 400G QSFP-DD-DCO transceivers directly into their switches or routers, network operators can remove the intermediate transponder/muxponder equipment layer. This immediately reduces capital expenditures for network operators. But even more important, there are tremendous savings in operational expenditures: the IP-over-DWDM architecture enabled by the Coherent QSFP-DD-DCO shrinks the amount of space that needs to be rented in central offices or co-location sites, cuts down overall electrical power consumption, lowers cooling requirements, and simply reduces the number of network elements that need to be planned, installed, managed, and maintained.

 

  • Digital coherent optics module, QSFP-DD form factor, Type 2A
  • IEEE 400GE or n×100GE (n = 1…4) Ethernet-compliant host interface
  • Interoperable coherent 400G/300G/200G/100G optical interface
  • High Tx output power (0 dBm) and Tx OSNR for compatibility with deployed ROADM line systems
  • Transmission reach >600 km at 400G with extended reaches at lower data rates
  • Full C-band tunable with flexible grid support
  • Case temperature range 0°C to 70°C
Products specifications
Attribute nameAttribute value
Technical details
Product colorStainless steel
Packaging data
Number of products included1 pc(s)
Operational conditions
Operating temperature (T-T)0 - 70 °C
Power
Input voltage3.3 V
Performance
SFP transceiver typeFiber optic
Maximum data transfer rate400000 Mbit/s
Interface typeQSFP-DD
Fiber optic connectorLC
Maximum transfer distance23622047.2"